Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Other

$9.99
Upgrade or refresh your bike. - When it's time to refresh your trusty bike, Trek Genuine Replacement Parts have you covered. - Replacement chainstay strike plate for 2011 Speed Concept & 2012 Madone - Self-adhesive
$34.99 $50.00 30% Off
This plug-in throttle mounts next to your HMI on your Globe bike and allows you to motor up to 20mph without needing to pedal. Need to go faster? Pedal assist will still be there to give you a boost to 28mph after the throttle reaches its limit. The throttle’s extra burst of torque makes entering and exiting traffic safer and faster but still allows you to use pedal assist to increase efficiency and range. - Designed for frictionless compatibility with the Globe Haul ST and Haul LT. - Max throttle speed: 20mph. Does not affect pedal-assist performance or top speed. - Requires installation of the free Globe phone app to activate.
$20.00
This bike kickstand was developed specifically for the Turbo Tero, allowing you to keep your bike upright on its own. If you need to complete your kit or replace a bike kickstand, this two-bolt dropout mount kickstand will do the job for you. Turbo Vado, Como, and Tero EQ come already equipped with a kickstand. - Durable aluminum construction. - Simple, two-bolt dropout mount allows for easy assembly. - Fits 40mm adapter plates. - Length: 362mm
$39.99
Turbo Chainstay-Mounted Kickstand - 323mm.
$24.99
Keep your pants clean with SKS's Chainboard chain guard. This handy device bolts onto the chainstay and bottom bracket, and utilizes a telescoping design to fit a wide variety of frames.
$44.99
- Prevents missed front shifts and frame damage from a dropped chain - For use with triple mountain cranksets with outboard bearings - Mounts behind drive-side bottom bracket cup - Bottom bracket mounting increases compatibility with 'low' clamp top-swing front derailleurs - Clamps and adjusts independent of front derailleur - Precision machined, anodized 6061 T6 aluminum
$11.99
- Axle mount - Made of steel - Fits 16-inch wheel bikes
$3.00 - $7.99
Clear stick on chainstay and frame protectors.
$22.99
An adjustable rear-mount kick stand that fits bikes of all sizes, from 24 inch to 29 inch wheels. Keep your bike safely upright and at the ready with the Rear Mount Adjustable Kickstand. Adjustable length makes it suitable for bikes with 24-29" wheels and installation is a breeze with all necessary hardware included. Product details - Adjustable length fits bikes with 24-29" wheels - Attaches to the rear of the bike near intersection of seatstay and chainstay - Includes mounting hardware
$119.95
In-bike storage and essential riding tools that can meet the needs of almost any trailside repair. Durable, flexible storage sleeves make for a secure, clean place to stow EnCase System tools or other small items. Fits most mountain bars and most road bars thanks to a storage sleeve with a customizable rubber flap that can be cut to meet your handlebar inner diameter. - 14 functions (spoke wrench; valve core wrench; flat head #3.5; Phillips #2; 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, and 8mm hex; and T10, T25, and T30 Torx) - Magnets & O-rings keep all parts in place - Ball detent swivel head helps access hard-to-reach places - Handle doubles as breaker bar when ball detent swivel head is bent for extra torque - Store in handlebar with a Wolf Tooth EnCase Storage Sleeve (included) - Magnet on bottom end of tool allows for storage on steel bike stands (or refrigerators) - Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops) - Chain & Tire Plug tool compatible with all bicycle chains including 12-speed - Inserter tool and bacon strips plug holes in tubeless tires - Five strips included; refills available - Hardened steel pin for lifetime durability - Requires 4mm hex for chain tool driver which can be found on the EnCase Hex Bit Wrench - Storage sleeves made of vibration-damping material and snug fit prevents rattling - Durable precision-machined aluminum end caps - Custom fit rubber flap can be trimmed to fit in smaller diameter bars - Bonus storage space—fits a Presta-to-Schrader adapter and valve core or a master link (both sold separately) - Includes Drop Bar Fit Kit to customize fit for larger-diameter road handlebars
$34.95
Easily carry everything you need for trailside repair, in a secure out-of-the-way location. The engineered design and rubber material of the sleeves keeps everything securely in place, prevents the multi-tools from rattling, and protects the multi-tools from dirt and moisture while still being simple to remove without tools. Extra space was created in the bar plugs to store a Presta-to-Schrader adapter and valve core or a master link for support on the trail. - Bonus storage space—fits a Presta-to-Schrader adapter and valve core or a master link (both sold separately) - Vibration-damping material and snug fit prevents rattling - Durable precision-machined aluminum end caps - Custom fit rubber flap can be trimmed to fit in smaller diameter bars - Included Drop Bar Fit Kit to customize fit for larger-diameter road handlebars - Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops)
$9.95
Light-duty zip tie - 200mm length x 2.5mm - Bag of 100
$30.00
Reusable zip ties - 200mm long x 7.4mm wide - 100 pieces
$50.00
Wheels Manufacturing, Zip Ties, Jar of 600, Black
$12.99
- Designed to fit most lightweight, midweight, and cruiser bicycles - Fits frames with welded-on mounting plates - Made in the U.S.A.
$34.99
Even the best can be better. The first version of this kickstand had been conceived, designed and manufactured by URSUS in 2005. There wasn’t any similar product, incredibly resistant and aesthetically beautiful, 100% MADE IN ITALY: very soon it became a bestseller and we protected it with an international 20-years patent. We still ship 9 million pieces per year all over the world. After about 10 years, we restyled our bestseller to make it even better by adding an enlarged crank bumper to ensure better protection against impacts, and a bigger foot, designed to easily adapt to any kind of ground surface.
$49.99
The Ursus BIG FOOT center-mount kickstand is an alloy double kickstand and has the capacity to hold up to 110 lbs. Suitable for bikes with extra cargo or a child seat. The plastic feet attached to the BIG FOOT kickstand is extremely strong and prevents the stand from slipping while in use. Kickstand length is 300 mm. BIG FOOT is designed to work with 28" wheeled bicycles. In order to fit this to your bike, you need to check if you have a kickstand plate welded to your bike frame. This can be found just behind the bottom bracket. Comes with an assembly kit that includes alloy plate, conical washer, 4 bolts (75mm, 65mm, 40mm, 22mm). Select the correct bolt length for your bicycle.
$28.50
Ursus BIG FOOT center-mount kickstand is an alloy double kickstand and has the capacity to hold up to 110 lbs. Suitable for bikes with extra cargo or a child seat. The plastic feet attached to the BIG FOOT kickstand is extremely strong and prevents the stand from slipping while in use. BIG FOOT is designed to work with 28" wheeled bicycles.
$11.55
Ursus Easy Rear Mount Adjustable center-mount kickstand has the capacity to hold up to 55 lbs. Tool-free adjustment allows you to set the perfect length for any bike with 26"-28" wheels.
$9.09 - $9.90
The Elegance aluminum fixed-length kickstand is available in three lengths for different wheel sizes.
$29.99
Ursus KING EVO R78 Adjustable rear-mount integrated kickstand (18 mm PLATE) is an alloy kickstand and has the capacity to hold up to 75 lbs. URSUS KING EVO is ideal for bicycles that are compatible with an integrated mount at the rear dropout - 18mm center to center two-bolt mounting. The adjustable tool-free kickstand features a button that allows you to set the perfect length (263mm - 333mm) for your bike.  Intended for bikes with an integrated mount at the rear dropout, this ultra-stable kickstand with an adjustable length will keep even the most stubborn bikes upright. Installation is quick and easy and the adjustable length works for bikes with wheels from 24-inch wheels all the way to 29-inch wheels. Compatible with Trek and other bikes designed with direct mount 18mm mounting holes on the rear chainstays.
$24.99
The Ursus MOOI R90 Adjustable rear-mount integrated kickstand (18 mm PLATE) is an alloy kickstand and has the capacity to hold up to 55 lbs. URSUS MOOI is ideal for bicycles that are compatible with an integrated mount at the rear dropout - 18mm center to center two-bolt mounting. The adjustable tool-free kickstand features a button that allows you to set the perfect length (263mm - 333mm) for your bike. Intended for bikes with an 18mm integrated mount at the rear dropout. 55 lbs capacity. Made in Italy. Intended for bikes with an integrated mount at the rear dropout, this ultra-stable kickstand with an adjustable length will keep even the most stubborn bikes upright. Installation is quick and easy and the adjustable length works for bikes with wheels from 24-inch wheels all the way to 29-inch wheels. Compatible with Trek and other bikes designed with direct mount 18mm mounting holes on the rear chainstays.
$14.99
Keep your investment protected with durable armor designed specifically for your ride. - Protection engineered to keep your ride looking as good as new for years to come. - Trek protective armor - Model-specific custom fit
$20.99
Keep your investment protected with durable armor designed specifically for your ride. - Protection engineered to keep your ride looking as good as new for years to come. - Trek protective armor - Model-specific custom fit
$19.99
Keep your investment protected with durable armor designed specifically for your ride. - Protection engineered to keep your ride looking as good as new for years to come. - Trek protective armor - Model-specific custom fit
$49.95
Allows Thule Yepp Maxi to be quickly installed on any bike with a rear rack with a load capacity of 25 kg/55 lbs. Features: - Fits rear racks measuring 11-17 cm/4.5-6.7 in
$49.95
Allows Thule Yepp Maxi to be installed on a bike with a rear rack with a load capacity of at least 35 kg/78 lbs and the ability to carry seat and bike bags. Features: - Fits rear racks measuring 11-17cm/4.5-6.7" - For use on rear racks with a load capacity of at least 35kg/78lbs
$90.00
The Surly Deck Bar is just what it sounds like, a convenient handlebar that attaches to the rear deck of the Big Easy, Big Dummy or Big Fat Dummy. Once attached, you will find that this is a very nice place for your passengers to grip and hold on tight while you cart them around town. I mean it’s that or the old uncomfortable around the waist hug move. You can decide what’s best for you and your passengers. Grips are also included with the bar, so you’ve got that going… - The Deck Bar attaches directly to the Dummy Deck to offer a secure hand grab for passengers - Provides a solid, comfortable handhold for riders large and small - Also available as part of the Corral Kit
$40.00
The Surly Deck Pad is the ultimate in cargo bike derrière accessories. Sold individually, the Surly Deck Pads are designed to easily attach to the rear decks of our Big Easy, Big Dummy and Big Fat Dummy for a luxurious passenger riding experience. Simply put, they make riding on the back of our cargo bikes even nicer. Two Pads will cover the whole deck, so there, now you know. You could probably even convince your ride-along friends or children to chip in and help pay for them. After all, nobody rides for free. - The Deck Pad mounts to the Dummy Deck to provide a soft platform for passengers large and small - Sold each - Also available as part of the Corral Kit - Individual Deck Pads measure approximately: 13”x8”x2”
$15.00
These two black plates fit nice and snug between the chainstays of the newly redesigned Disc Trucker (2020 and newer), allowing you to bolt on the kickstand of your choice without gravely injuring your frame. Our other silver-colored Kickstand Plates remain the best option for legacy Trucker frames, so please don’t use the old plates with the new bike or the new plates with the old bikes. Normally we don’t like to tell people how to use our stuff, but in this case we have to take… a stand. - Allows use of any kickstand while protecting chainstays from damage - Includes two plates to protect the top and bottom of the chainstays - Compatible with 2020 and newer Disc Trucker frames
Page 1 of 5 Next page