WD-40 Dry Lube is the perfect chain and component lubrication for dry and arid riding conditions. Extensively tested by scientists and pro mechanics alike, it keeps your bicycle shifting like a dream and pedaling smoothly. It boasts special polymers that form a dry film to protect your chain and repel dirt in dry conditions. The result is a clean, quiet, perfectly functioning and long-lasting drivetrain.
$5.99 - $127.10
- Light viscosity oil for deep penetration with teflon for durability - Law prohibits orm-D materials from shipping by air
The only thing missing is the kitchen sink! The Topeak Ratchet Rocket Lite NTX has everything you need to fix and make precise adjustments to your bike while on the road. Featuring a fine tooth ratchet mechanism with reverse lever and thumb wheel with Nano TorqBits for ease and torque accuracy in tight spots. Includes magnetic bit holder, hardened steel tools in 2, 2.5, 3, 4, 5, 6 and 8mm hex, T10, T25 Torx, #2 Phillips bits and two engineering grade plastic tire levers. The protective case keeps things organized and secure, and even has a pocket to carry glueless patches. - Functions: 18 - Torque Value: 4/5/6 Nm - Allen Bits: 2/2.5/3/4/5/6/8 mm - Torx Bits: T10 / T25 - Screw Drivers: #2 Phillips - Tire Levers: 2 plastic - Tool Material: Hardened steel - Ratchet Tool Material: Chrome vanadium steel - Bag: Nylon - Size: 12 x 7.2 x 3 cm / 4.7” x 2.8” 1.2” - Weight: 230 grams
The Surly Jethro Tule rocks. It's made from tough, polished stainless steel and sports dual-purpose functionality. One end is the 15mm offset box end wrench you need to take your wheels off. While the other end provides stellar leverage and a bottle opener! That's two of the tools you need, in your pocket, all the time.
Speedplay cleats require routine lubrication for optimal performance and durability. Speedplay's SP-LUBE is specially formulated to dry instantly and bond to the pedal and cleat surfaces, creating a highly protective barrier that does not attract dirt. Use SP-LUBE regularly to ensure maximum functionality and improved pedal performance.
With nine different corrosion-resistant bits, the EMT 9 Tool has all the tools you need for almost any repair. - Forged aluminum side plates. - Forged steel bits are nickel plated for corrosion resistance. - 2, 2.5, 3, 4, 5, 6, and 8mm hex bits - T25 Torx and Phillips head screwdriver bits.
$11.90 - $31.99
- Cleaning oil and all weather oils for Rohloff speedhubs
$7.99 - $18.50
Rock-N-Roll Absolute Dry lubricant is a super-clean chain lube that picks up little or no dirt. - For road bikes only
$11.00 - $64.00
The original bike polish, Bike Lust's proprietary silicone-based formula includes a biodegradable cleaning agent. Bike Lust goes on wet, quickly cleaning light dirt and grime as it polishes, and then dries to a beautiful protective coating. Works on any surface or material in one simple step, making your bike look like new and future cleaning easier! It's also great for dropper posts, suspension, and for seating tire beads. - Makes your bike shine like new and keeps it that way - Biodegradable formula cleans, polishes, and protects in one step - Also great for dropper posts, suspension, and for seating tire beads
Removes and installs crank caps on Shimano® Hollowtech II® cranks. Includes built in hook to lift the safety plate, speeding crank removal. Steel, investment cast body provides good leverage and includes an option to use with an 8mm hex wrench for removing seized caps.
The BBT-22 is a shop-quality tool for installing and removing Shimano and ISIS Drive splined 20-tooth bottom bracket cups. Made from investment-cast steel, the BBT-22 ensures maximum engagement with the bottom bracket cup. It can be used with a 3/8-inch drive torque wrench, a 3/8-inch ratchet driver, a 32mm wrench, the Park FRW-1 Freewheel Remover Wrench (sold separately), or a 1-inch wrench.
Precision CNC machined aluminum tool for the installation and removal of 16-notch external bearing bottom brackets. Anodized for easy identification and featuring a ratchet/torque wrench compatible 3/8-inch drive. - 16 notch 49mm OD cup - Fits FSA MegaEvo and more
The Bottom Bracket Wrench removes and installs Shimano Hollowtech II, Race Face X-type, FSA MegaExo, Campagnolo Ultra-Torque and TruVativ Giga X-pipe bottom brackets. Laser cut for a precise fit, one end of the BBT-9 securely engages the 16 cup notches, while the other end engages the 8 internal splines of the crankarm adjustment cap.
Park's Bottom Bracket/Cassette Tool for Campagnolo is an indispensable tool for your Campagnolo drivetrain. It's for installing and removing all Record, Chorus, Centaur and Athena bottom brackets, and all Campagnolo cassette lockrings.
The CC-4 is a drop-in style gauge that measures bicycle chain wear. The laser cut CC-4 accurately measures a long section of chain and strategically comes in contact with the chain in three places, quickly and easily taking the guesswork out of knowing when chain replacement is necessary. A worn chain will cause poor shifting as well as accelerate drivetrain wear. The tool works on any 5 to 12-speed derailleur chain (including SRAM AXS) and is designed to accurately indicate when a chain reaches .5% and .75% wear, the points at which most chain manufacturers suggest replacement.
Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. The FR-5.2G has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, SunRace, SunTour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also Fits Shimano disc brake lockrings - Guide pin stabilizes tool
A worn chain shifts poorly and wears sprockets at an accelerated rate. Park Tool's Chain-Wear Indicator is a “go-no go” gauge designed to accurately indicate when a chain reaches .5% and .75%, the points at which most chain manufacturers suggest replacement. The updated CC-3.2 is longer, more accurate and features permanent measurement markings.
Park's Crank Puller is for removing crankarms on Shimano's splined, oversize, pipe-billet bottom brackets. It employs a long handle and a fine thread for the leverage and torque needed to remove tight arms. Park's unique rotating tip ensures smooth operation and long life. (The CCP-44 does not fit standard square or tapered bottom brackets.)
A favorite of shop mechanics for over 30 year's, Park's CCP-22 Crank Puller removes crankarms that feature square tapers, and those that fit on Power Drive and Power Spline bottom bracket interfaces. The long, comfortable, built-in handle and fine thread provide the leverage needed to remove even the tightest crankarms. And, there's a rotating tip to ensure smooth operation and long life.
The Park FR-4 Freewheel Remover fits Atom, Regina, splined Zeus and some Schwinn-approved freewheels. It's built thin so that removing axle parts is unnecessary. And, it's constructed of durable heat-treated steel.
Park's FR-8 Freewheel Remover fits flip-flop BMX hubs with 30 x 1mm threads. It can be held with a wrench or vise, and its narrow profile allows use without removal of cones and locknuts.
The Park Tool Fold-Up Hex Wrench Set combines 4, 5 and 6mm hexes, a flat blade screwdriver and a T25 Torx compatible driver into one convenient fold-up tool. Its multi-position composite handle is comfortable, lightweight, slip-resistant, and 40% stronger than steel handles.
Park's Hex Wrench Set offers all the popular Allen wrenches (1.5, 2, 2.5, 3, 4, 5 and 6mm) in a convenient fold-up unit. The tool tips are chamfered for a positive grip and the one-piece fiber-reinforced-resin handle is light, comfortable, slip resistant and 40% stronger than steel.
Park's Gear Clean Brush has a handle on one end with a curved, serrated edge perfect for cleaning between cassette cogs. The other end's tough nylon bristles are ideal for cleaning the derailleurs, chain and other drivetrain parts to keep them clean and prevent premature wear. It also works great on brakes and other components that collect dirt and grime. The GearClean easily fits in a toolbox or pack.
$8.95 - $12.95
Specially designed for crank bolts, freehub removals and pedal installs and removals, Park's Hex Tools are built for speed, leverage and comfort. Their super-precise hex heads and dual-density, ergonomic handle mean the HTs may soon become your new favorite tools.
The AWS-3 offers 2, 2.5 and 3mm Allen wrenches in a Y shape for excellent leverage. The Allens are vinyl coated for comfort, too.
The AWS-1 is one of Park's most-popular tools because it fits the most-turned bicycle bolts. It features 4, 5, and 6mm Allen wrenches in a Y shape for excellent leverage. Each Allen is vinyl coated for comfort.
Park's Home Mechanic Pedal Wrench is great for your home workshop and event tool box. This top-quality 15mm pedal wrench provides the leverage you need to remove stubborn pedals. It's made to last from heat-treated steel, and the handle has a vinyl grip for comfort.
Many chains use a master link that allows the chain to be installed and removed by hand. While master links don't require traditional chain tools, over time, dirt and corrosion can make it difficult to separate them by hand. Park's Master Link Pliers make removing and installing these master links quick and easy. Simply insert the specially sized jaws into the link and squeeze the vinyl-coated handles!
Park's Mini Chain Brute Chain Tool goes anywhere and features a V-shaped handle, a super-strong replaceable pin, and fine threads to make chain removal and installation a breeze. The CT-5 works on any derailleur chain, including Shimano Hyperglide and 9-, 10-, and 11-speed. It works for loosening tight links, too.
Page 1 of 26 Next page